Contact Us By Email: Customerservice@peachykeenprints.com

DTF Turnaround Time is Currently 1-3 BUSINESS DAYS

Your cart

Your cart is empty

This listing is for the custom DESIGN FEE ONLY. You will still need to purchase the prints.

CUSTOM DTF MASCOT INFORMATION:

You must purchase a NON-REFUNDABLE and NON-TRANSFERABLE design fee for EACH DESIGN that you need.

You will not receive the design file. We retain all rights to print our designs.

IF you selected that you would like a mockup -------Within 5 business days - You will be provided a mockup on a light gray shirt for your use in gathering orders.

When you are ready to order your prints you can order them here:

CUSTOM PRINTS - LEOPARD STITCHED ALPHA

These are for DTF Prints

We will send the mockup (if selected) to the email address you initially used to order the design.

Direct to Film (DTF) Application Instructions

First, Check Your Temperature & Pressure

It's important to calibrate your press to the proper temperature and pressure required for quality results. For checking temperature, we recommend using a quality Infrared (IR)

Temperature Gun (Contactless) to ensure your heat press is heating evenly and accurately.

When it comes to quality heat pressed garments, pressure is (almost) everything. Not using enough pressure is the most common cause for any application issues we see.

Make sure your pressure is set correctly on your machine - refer to your press' manual for how to do this correctly.

Step 1: Adjust Settings & Prepare your Garment

Set your time and temperature to our recommended settings:

Temperature: 325°F

Pressure: Medium to Heavy Pressure

Pre-press your garment for 5-10 seconds at 325°F.

Step 2: Load Garment, Place Transfer, and Press!

Lay garment down on the lower platen, making sure seams, zippers, etc are off the edge.

This ensures even application. Place the transfer print-side down so that the ink is touching the garment - make sure it's not upside down!

The clear film is super helpful with making sure you're placing the transfer correctly.

Press the transfer for 7-10 seconds at 325°F. Our DTF transfers are COOL or COLD peel.

Immediately after the garment is cool, hold the garment steady, grab a corner of the paper,

and peel diagonally in a smooth, deliberate motion.

Step 3: Finish it Off!

A post-press really helps to seal the transfer to the garment. Now it's time to decide what

kind of finish you'd like!

For a gloss finish: use teflon paper.

For a matte finish: use parchment paper or a clean scrap shirt.

Cover your transfer with the option of your choice, then post-press your transfer for 5-10 seconds.

CUSTOM DESIGN FEE - STITCHED LEOPARD ALPHA

Regular price $8.00
Unit price
per 
Shipping calculated at checkout.

Have questions? Contact us by emailing customerservice@peachykeenprints.net

Secure payment

This listing is for the custom DESIGN FEE ONLY. You will still need to purchase the prints.

CUSTOM DTF MASCOT INFORMATION:

You must purchase a NON-REFUNDABLE and NON-TRANSFERABLE design fee for EACH DESIGN that you need.

You will not receive the design file. We retain all rights to print our designs.

IF you selected that you would like a mockup -------Within 5 business days - You will be provided a mockup on a light gray shirt for your use in gathering orders.

When you are ready to order your prints you can order them here:

CUSTOM PRINTS - LEOPARD STITCHED ALPHA

These are for DTF Prints

We will send the mockup (if selected) to the email address you initially used to order the design.

Direct to Film (DTF) Application Instructions

First, Check Your Temperature & Pressure

It's important to calibrate your press to the proper temperature and pressure required for quality results. For checking temperature, we recommend using a quality Infrared (IR)

Temperature Gun (Contactless) to ensure your heat press is heating evenly and accurately.

When it comes to quality heat pressed garments, pressure is (almost) everything. Not using enough pressure is the most common cause for any application issues we see.

Make sure your pressure is set correctly on your machine - refer to your press' manual for how to do this correctly.

Step 1: Adjust Settings & Prepare your Garment

Set your time and temperature to our recommended settings:

Temperature: 325°F

Pressure: Medium to Heavy Pressure

Pre-press your garment for 5-10 seconds at 325°F.

Step 2: Load Garment, Place Transfer, and Press!

Lay garment down on the lower platen, making sure seams, zippers, etc are off the edge.

This ensures even application. Place the transfer print-side down so that the ink is touching the garment - make sure it's not upside down!

The clear film is super helpful with making sure you're placing the transfer correctly.

Press the transfer for 7-10 seconds at 325°F. Our DTF transfers are COOL or COLD peel.

Immediately after the garment is cool, hold the garment steady, grab a corner of the paper,

and peel diagonally in a smooth, deliberate motion.

Step 3: Finish it Off!

A post-press really helps to seal the transfer to the garment. Now it's time to decide what

kind of finish you'd like!

For a gloss finish: use teflon paper.

For a matte finish: use parchment paper or a clean scrap shirt.

Cover your transfer with the option of your choice, then post-press your transfer for 5-10 seconds.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)