CUSTOM FULL COLOR MASCOT INFORMATION:

You MUST purchase a $15 NON-REFUNDABLE and NON-TRANSFERABLE design fee for EACH MASCOT that you need.

You will not receive the design file. We retain all rights to print our designs.

After purchasing the design fee please EMAIL your ORDER NUMBER along with the Custom print information (Mascot Name and the Background Script Word) to customerservice@peachykeenprints.com.

FOR PRINTS:

The only color change possible is the background. The Name and borders will remain the same as pictured. IF YOU FAIL TO PROVIDE THE BACKGROUND COLOR IN YOUR EMAIL WE WILL CONTACT YOU VIA EMAIL. WE WILL NOT DESIGN YOUR CUSTOM UNTIL YOU HAVE PROVIDED THE COLOR.

Within five business days we will provide you with a mockup of your design on a light gray shirt for your use (like the additional product photos).

After you receive the mockup and have gathered your orders, please confirm the quantity of prints you need (see minimums information below) by replying to the mockup email and we will create a custom order for you.

MINIMUMS:

For Full color, high heat, soft ink screen print transfers: 

36 minimum pricing is $6.00 for each print.

75 minimum pricing is $4.00 for each print.

For DTF Prints:

Order in quantities of 6. There is a minimum of 6 required for DTF. $5.00 for each print.

After purchasing the prints you can expect that your order will ship to you within 2-7 business days.

We will send the order to the email address you initially used to notify us of your mascot information and order number.

*****Please Note*****

All orders that remain unpaid more than 4 days will be automatically canceled.

Direct to Film (DTF) Application Instructions

First, Check Your Temperature & Pressure

It's important to calibrate your press to the proper temperature and pressure required for quality results. For checking temperature, we recommend using a quality Infrared (IR)

Temperature Gun (Contactless) to ensure your heat press is heating evenly and accurately.

When it comes to quality heat pressed garments, pressure is (almost) everything. Not using enough pressure is the most common cause for any application issues we see.

Make sure your pressure is set correctly on your machine - refer to your press' manual for how to do this correctly.

Step 1: Adjust Settings & Prepare your Garment

Set your time and temperature to our recommended settings:

Temperature: 325°F

Pressure: Medium to Heavy Pressure

Pre-press your garment for 5-10 seconds at 325°F.

Step 2: Load Garment, Place Transfer, and Press!

Lay garment down on the lower platen, making sure seams, zippers, etc are off the edge.

This ensures even application. Place the transfer print-side down so that the ink is touching the garment - make sure it's not upside down!

The clear film is super helpful with making sure you're placing the transfer correctly.

Press the transfer for 7-10 seconds at 325°F. Our DTF transfers are COOL or COLD peel.

Immediately after the garment is cool, hold the garment steady, grab a corner of the paper,

and peel diagonally in a smooth, deliberate motion.

Step 3: Finish it Off!

A post-press really helps to seal the transfer to the garment. Now it's time to decide what

kind of finish you'd like!

For a gloss finish: use teflon paper.

For a matte finish: use parchment paper or a clean scrap shirt.

Cover your transfer with the option of your choice, then post-press your transfer for 5-10 seconds.